EMCO has no horn over 40GHz. --- "WOODS, RICHARD" <wo...@sensormatic.com> wrote: > > Try EMCO for horns and MITEQ for preamps. > > ---------- > From: Leslie Bai [SMTP:leslie_...@yahoo.com] > Sent: Thursday, August 12, 1999 1:15 PM > To: 'emc-p...@majordomo.ieee.org' > Subject: Horn antennas, pre-amplifier, and return > loss measurement > > > Hi, Folks, > > Is there anyone can direct me to some sources > of horn antennas & preamplifiers. > > What I need are sets of horn antenna for spurious > emissions testing to meet FCC Part 101. > > 1 to 18GHz, > 18 to 26.5GHz, 26.5 to 40GHz, or 18 to 40GHz > instead, > 40 to 60GHz, 50 to 75GHz, or 40 to 75GHz instead, > 75 to 110GHz, 110 to 170GHz, or 75 to 170GHz > instead. > > Due to the significant space loss over 110GHz, I > guess > I also need a set of preamplifier from 110 to > 170GHz. > > I am also studying on return loss measurement > methodologies to meet ETSI requirement for > radios RF port. Since NAMAS calibration of > network analyzer may cost thousands bucks, > I am wondering if I could achieve a good result > (in terms of accuracy and uncertainty) using > spectrum analyser and waveguide coupler. > If anyone by any chance has an ready error model > of the test setup using spectrum analyzer and > waveguide coupler, I appreciate you could share > with me to short my research path. > > Thanks in advance. > > Leslie Bai > Senior Compliance Engineer > Compliance Quality Manager > Digital Microwave Corporation > 170 Rose Orchard Way > San Jose, CA 95134 > Tel: (408)-944-1754 > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at > http://mail.yahoo.com > > > --------- > This message is coming from the emc-pstc discussion > list. > To cancel your subscription, send mail to > majord...@ieee.org > with the single line: "unsubscribe emc-pstc" > (without the > quotes). For help, send mail to > ed.pr...@cubic.com, > jim_bac...@monarch.com, ri...@sdd.hp.com, or > roger.volgst...@compaq.com (the list > administrators). > > > --------- > This message is coming from the emc-pstc discussion > list. > To cancel your subscription, send mail to > majord...@ieee.org > with the single line: "unsubscribe emc-pstc" > (without the > quotes). For help, send mail to ed.pr...@cubic.com, > jim_bac...@monarch.com, ri...@sdd.hp.com, or > roger.volgst...@compaq.com (the list > administrators). > > >
_________________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).