At a former employer, one of our power supplies used a PWB mounted, canned filter. However, securing an adequate third-wire ground required that it be bolted to the chassis.
Cortland PS: If you're in Irvine, ONE of my former employers was right across the street from you. cer ====================== Original Message Follows ==================== >> Date: 01-Dec-00 12:17:18 MsgID: 1077-6566 ToID: 72146,373 From: "Tudor, Allen" >INTERNET:[email protected] Subj: AC inlet Chrg: $0.00 Imp: Norm Sens: Std Receipt: No Parts: 1 From: "Tudor, Allen" <[email protected]> Subject: AC inlet List-Post: [email protected] Date: Fri, 1 Dec 2000 12:08:26 -0800 Reply-To: "Tudor, Allen" <[email protected]> Greetings, Is anyone aware of an ac inlet with line filter that mounts on a printed wiring board? What I'm thinking of is something like the chassis mount versions made by Schruter, Corcom, & Delta. Any leads would be appreciated. Thanks in advance. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ====================== End of Original Message ===================== ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
