If it's got electrical power (e.g. self contained with pumps) try
EN60335-2-40. Otherwise, if it's under 0.5bar gauge there's no
requirement and if it's more than 0.5bar gauge at any point the
Pressure Equipment Directive may apply.
Drop me a line direct if you need more help.
Rgds
Nick.
At 07:14 -0500 3/11/2000, [email protected] wrote:
I've looked through the OJ (.pdf, april'00) for both the LVD and the EMCD and
I can't come up with anything obviously applicable to demonstrating
compliance for a water-to-water heat exchanger. Process water is
(re)circulated through the exchanger and where heat is traded to a reservior
of cooling water. Enclosure is all metal. Any advice?
Many thanks
WmFlanigan
Ameritherm Inc
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
