Bonjour de Montréal,
This is true, but don't forget that if your product uses or generate frequencies over 108 MHz you will have to test over 1 GHz using the ANSI C63.4 Standard and Part 15 limits. The FCC limit can go up to 40 GHz according to the following table:
9 KHz to 1,705 MHz / 30 MHz 1,705 to 108 MHz / 1 GHz 108 to 500 MHz / 2 GHz 500 to 1000 MHz/ 5 GHz > 1 GHz / 5th harmonic up to 40 GHz Best regards, At 03:13 PM 10/19/2000 -0400, [email protected] wrote:
FCC Pt15 states that you can use their limits or, alternatively, the limits found in CISPR 22:1995. Your EN Class B data should be sufficient for having your lab generate an FCC B (or A) report. Jack -----Original Message----- From: Colgan, Chris [mailto:[email protected]] Sent: Thursday, October 19, 2000 4:51 AM To: 'Emc-Pstc' (E-mail) Subject: RE: EN55022 vrs. FCC Part 15 No. The class B FCC limits for conducted disturbance at the mains ports are lower than EN55022 class B. QP limits: FCC - 0.45 to 30MHz = 48dBuV EN - 0.15 to 0.5MHz = 66 to 56dBuV (decreasing linearly with the log of frequency) 0.5 to 5MHz = 56dBuV 5 to 30MHz = 60dBuV Radiated disturbance is performed at 3m for FCC and 10m for EN55022. The limits and are different. QP limits: FCC @ 3m - 30 to 88MHz = 34dBuV/m 88 to 216MHz = 37.5dBuV/m 216 to 960MHz = 40dBuV/m 960 to 1000MHz = 48dBuV/m EN @ 10m - 30 to 230MHz = 30dBuV/m 230 to 1000MHz = 37dBuV/m I'm afraid the only way to compare the two standards is to buy copies of them. Chris Colgan EMC & Safety > TAG McLaren Audio Ltd The Summit, Latham Road Huntingdon, Cambs, PE29 6ZU United Kingdom > * Phone: +44 (0)1480 415627 > * Fax: +44 (0)1480 415689 > * Mailto:[email protected] > * http://www.tagmclarenaudio.com > > > > -----Original Message----- > From: Keith Zell [SMTP:[email protected]] > Sent: 18 October 2000 14:53 > To: [email protected] > Subject: EN55022 vrs. FCC Part 15 > > > Will a product certified to EN55022 class B necessarily comply to FCC Part > 15 Class A limits? Where might I find a valid comparison of these two EMC > standards. > > As always, thanks for your help. > > B. Keith Zell > Electrical Design Engineer > PMI Food Equipment Group > Troy, OH 45374 > (937) 332-3067 (ph) > (937) 332-3007 (fax) > [email protected] ************************************************************** Please visit us at www.tagmclarenaudio.com ************************************************************** The contents of this E-mail are confidential and for the exclusive use of the intended recipient. If you receive this E-mail in error, please delete it from your system immediately and notify us either by E-mail, telephone or fax. You should not copy, forward or otherwise disclose the content of the E-mail. TAG McLaren Audio Ltd The Summit, 11 Latham Road Huntingdon, Cambs, PE29 6ZU Telephone : 01480 415600 (+44 1480 415600) Facsimile : 01480 52159 (+44 1480 52159) ************************************************************** Please visit us at www.tagmclarenaudio.com ************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
-------------------------------------------------------------------------- Benoit Nadeau, ing. M.ing. (P.Eng., M.Eng) Gerant du Groupe Conformite (Conformity Group Manager) Matrox <http://www.matrox.com/> -------------------------------------------------------------------------- 1055, boul. St-Regis Dorval (Quebec) Canada H9P 2T4 Tel : (1)(514) 822-6000 (x2475) FAX : (1)(514) 822-6275 Internet : [email protected], <mailto:[email protected]> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
