Chris,
I would prefer a simpler solution (only two parts): solder lock ring
terminal (with a built-in star washer) + nut.
John Radomski
"Colgan, Chris"
<Chris.Colgan@TAGMcLaren To:
<[email protected]>
Audio.com> cc:
Sent by: Subject: earth bonding
stud
[email protected]
10/09/00 05:41 AM
Please respond to
"Colgan, Chris"
Hello group
Having only ever dealt with Class II double insulated products, we are
going
to produce a Class I earthed product. We have an M4 stud in the baseplate
and I have to spec the method of connecting the stud to the IEC mains inlet
to provide chassis bonding to earth.
I was going to suggest the following "stack" of parts:
M4 crinkle washer, M4 solder terminal, M4 crinkle washer, M4 Nyloc nut.
Does anyone think that this might prove unsuitable?
Regards
Chris Colgan
EMC & Safety
> TAG McLaren Audio Ltd
The Summit, Latham Road
Huntingdon, Cambs, PE29 6ZU
United Kingdom
> * Phone: +44 (0)1480 415627
> * Fax: +44 (0)1480 415689
> * Mailto:[email protected]
> * http://www.tagmclarenaudio.com
>
**************************************************************
Please visit us at www.tagmclarenaudio.com
**************************************************************
The contents of this E-mail are confidential and for the exclusive
use of the intended recipient. If you receive this E-mail in error,
please delete it from your system immediately and notify us either
by E-mail, telephone or fax. You should not copy, forward or
otherwise disclose the content of the E-mail.
TAG McLaren Audio Ltd
The Summit, 11 Latham Road
Huntingdon, Cambs, PE29 6ZU
Telephone : 01480 415600 (+44 1480 415600)
Facsimile : 01480 52159 (+44 1480 52159)
**************************************************************
Please visit us at www.tagmclarenaudio.com
**************************************************************
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
