There is more to it than just the levels, Kurt. You must also know how what
test equipment is needed, the test set up, the test conditions and the
pass/fail criteria. For that you will need this standard and one basic
standard for each of the tests.
Richard Woods
----------
From: Andrews, Kurt [SMTP:[email protected]]
Sent: Thursday, October 05, 2000 12:34 PM
To: EMC-PSTC
Subject: EN 55024 Immunity testing
Importance: High
Group,
I have been asked to come up with information on what is involved in
EN
55024 Immunity testing. Specifically what are the various voltages,
currents, etc. used for each test. I do not have a copy of the
standard and
my company does not want to purchase it at this time. For instance I
know
that one of the tests involves zapping the EUT with an ESD charge,
but I
don't know the voltages/currents involved. I also know that the
input power
is subjected to various dips and drops, but again I don't know the
specifics. If anyone in the group could come up with all of the
various test
voltages, currents, etc. for all of the EN 55024 tests it would be
very much
appreciated. A web site with the same information would also be
great. If it
would take too much research to come up with this information (as I
suspect), let me know and maybe I can justify our purchase of the
standard.
Thanks,
Kurt Andrews
Compliance Engineer
Tracewell Systems, Inc.
567 Enterprise Drive
Westerville, Ohio 43081
voice: 614.846.6175
toll free: 800.848.4525
fax: 614.846.7791
http://www.tracewellsystems.com/ <http://www.tracewellsystems.com/>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
