Group, I have been asked to come up with information on what is involved in EN 55024 Immunity testing. Specifically what are the various voltages, currents, etc. used for each test. I do not have a copy of the standard and my company does not want to purchase it at this time. For instance I know that one of the tests involves zapping the EUT with an ESD charge, but I don't know the voltages/currents involved. I also know that the input power is subjected to various dips and drops, but again I don't know the specifics. If anyone in the group could come up with all of the various test voltages, currents, etc. for all of the EN 55024 tests it would be very much appreciated. A web site with the same information would also be great. If it would take too much research to come up with this information (as I suspect), let me know and maybe I can justify our purchase of the standard.
Thanks, Kurt Andrews Compliance Engineer Tracewell Systems, Inc. 567 Enterprise Drive Westerville, Ohio 43081 voice: 614.846.6175 toll free: 800.848.4525 fax: 614.846.7791 http://www.tracewellsystems.com/ <http://www.tracewellsystems.com/> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
