You are indeed correct in stating that KTL can perform such testing/investigations. I have forwarded these messages to the Product Safety Manager, Sim Jagpal. He can be contacted at +1 (613) 737-9680 or email [email protected].
Thankyou George and Bruce. Regards, Phil Godfrey Manager, Product Safety > -----Original Message----- > From: Bruce Touzel [SMTP:[email protected]] > Sent: Thursday, July 20, 2000 12:36 PM > To: Jim Bacher > Cc: Seminsky; George; 'EMC - PSTC Forum' > Subject: Re: Korean Requirements > > > KTL Ottawa is the only I know of which Korea will accept EMC/EMI results > from. > > Jim Bacher wrote: > > > Forwarding for George > > > > ____________________Reply Separator____________________ > > Subject: RE: Korean Requirements > > Author: "Seminsky; George" <[email protected]> > > Date: 7/20/00 7:28 AM > > > > The last time I checked, South Korean safety is IEC950 based, analog > > telephony is FCC part 68 based, and that EMC is CISPR22 based. However, > the > > Korean authorities will not accept test reports, certifications for > other > > countries. And a product must be tested, certified in either an > in-country > > lab or in a certified lab in a country that has an MRA with South Korea. > > Check with KTL Ottawa for the latest information. > > > > George Seminsky > > Compliance Engineering > > Nuera Communications. Inc. > > 10445 Pacific Center Court > > San Diego, CA 92121 > > Ph 858 625 9220 X1248 > > Fx 858 625 2422 > > www.nuera.com > > > > -----Original Message----- > > From: Cameron O'phee [mailto:O'[email protected]] > > Sent: Wednesday, July 19, 2000 4:54 PM > > To: 'EMC - PSTC Forum' > > Subject: Korean Requirements > > > > Hello All, > > > > I would like to get some advice on what is required to have products > > approved for sale in South Korea. Our equipment has been tested for > Safety > > and EMC to Australian and European requirements. The Australian test > house > > that performs the safety testing can generate CB reports for safety. > > Contrary to the advice of the CB website, our agent in Korea has been > > informed that we would have to completely re-test our equipment for both > EMC > > and safety. Is this correct? > > > > The standards that we are currently certified to are as follows, > > > > Australia > > Safety - AS/NZS 3260 > > EMC - AS/NZS 3548 > > > > Europe > > Safety - EN60950 > > EMC - EN55022 and EN50082-1 > > > > This is my first e-mail to the group and I have to say that this forum > has > > been most educational. > > > > Regards, > > > > Cameron O'Phee. > > Technical Officer. > > EMC & Safety Precompliance. > > Aristocrat Technologies Australia. > > > > Telephone : +61 2 9697 4420 > > Facsimile : +61 2 9663 1412 > > Mobile : 0418 464 016 > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Jim Bacher: [email protected] > > Michael Garretson: [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
