Hi, I'm not familiar with any requirements disallowing the use of red leds (at least per IEC 60950 and derivatives) but you'll need to ensure the LEDs (and the application) meet EN 60825 laser class 1 requirements (ref. to cl. 0.2.6; 4.3.13 and Annex P)..
My opinion and not that of Sanmina Canada ULC. Regards, Kaz Gawrzyjal, P. Eng. Sr. Product Safety Engineer ---------------------------------------------- Sanmina Canada ULC Wireless Development Centre 2924 11 Street NE Calgary, Alberta Canada, T2E 7L7 tel: 403-769-4805 (ESN 758) fax: 403-769-4813 (ESN 758) e-mail: [email protected] -----Original Message----- From: Mark Schmidt [mailto:[email protected]] Sent: Friday, September 22, 2000 7:59 AM To: [email protected] Subject: Red LED's Is the use of Red LED's acceptable for I.T.E. equipment in the EU in accordance with LVD and EMCD? All comments welcome. Thank you. Mark Schmidt X-Rite Incorporated U.S.A. [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
