Mark, Clause 1.7.8.2 of EN 60950 (for ITE Equipment) states: "Where safety is involved, colors of controls and indicators shall comply with IEC 73. Where colors are used for functional controls or indicators, any color, including red, is permitted provided that it is clear that safety is not involved."
We have used red LEDs in ITE equipment that is approved for use in the EU for items such as fan faults, overtemperature faults, etc. These products have been approved for use in the EU by both TÜV and Intertek with red LEDs. Kurt Andrews Compliance Engineer Tracewell Systems, Inc. 567 Enterprise Drive Westerville, Ohio 43081 voice: 614.846.6175 toll free: 800.848.4525 fax: 614.846.7791 http://www.tracewellsystems.com/ <http://www.tracewellsystems.com/> -----Original Message----- From: Mark Schmidt [SMTP:[email protected]] Sent: Friday, September 22, 2000 9:59 AM To: [email protected] Subject: Red LED's Is the use of Red LED's acceptable for I.T.E. equipment in the EU in accordance with LVD and EMCD? All comments welcome. Thank you. Mark Schmidt X-Rite Incorporated U.S.A. [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
