Amund, My feeling is that the test validates the protection. If devices are not correctly rated for the application or applied correctly for the intended use, the product may still be vulnerable.
Regards, Don Umbdenstock > ---------- > From: Westin, Amund[SMTP:[email protected]] > Reply To: Westin, Amund > Sent: Thursday, May 11, 2000 4:15 AM > To: 'emc-pstc' > Subject: EMC vs. Exi equipment > > > Hello members, > > One question, what's common practise regarding surge test (EN61000-4-5 > on signal lines) on lines which contains zener barriers ? Have a feeling > that the surge test is not applicable..... > > Comments ? > > Best regards > Amund Westin > Det Norske Veritas > * [email protected] > > > > > ********************************************************************** > Neither the confidentiality nor the integrity of this message > can be guaranteed following transmission on the Internet. > This message has been swept by MAILsweeper at DNV for > the presence of computer viruses. > ********************************************************************** > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
