Barry
You can also look at the UL Standard for Vacuum cleaning machines (UL1017). The dielectric test on "powered" vacuum hoses also employed lead shot. Kelly At 10:03 AM 3/17/00 +0200, Peter Merguerian wrote: > >Barry, > >In my old days working for UL, we used lead shot to test the dielectric >strength properties of insulated wire connectors. I suggest you take a look >at the wire connector standards UL486 Series. > > > >At 15:26 16/03/2000 -0600, barrym wrote: >> >>I'm looking for reference to any standard which may provide specifics for >>using lead shot for dielectric strength testing. I know this done for >>insulation system qualifications, just have not identified a standard for >>the test set up. >> >>Thanks, >>Barry Marks >> >> >>------------------------------------------- >>This message is from the IEEE EMC Society Product Safety >>Technical Committee emc-pstc discussion list. >> >>To cancel your subscription, send mail to: >> [email protected] >>with the single line: >> unsubscribe emc-pstc >> >>For help, send mail to the list administrators: >> Jim Bacher: [email protected] >> Michael Garretson: [email protected] >> >>For policy questions, send mail to: >> Richard Nute: [email protected] >> >> >> >Peter Merguerian >Managing Director >Product Testing Division >I.T.L. (Product Testing) Ltd. >Hacharoshet 26, POB 211 >Or Yehuda 60251, Israel > >Tel: 972-3-5339022 Fax: 972-3-5339019 >e-mail: [email protected] >website: http://www.itl.co.il > > > > > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > **************************************************************** Kelly Tsudama Cisco Systems [email protected] 408-527-0216 408-525-9150 fax 408-322-9024 pager ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
