Paul, UL6500 2nd edition requires that decorative parts meet any of the following flame ratings: HB, V-2, V-1, V-0, HBF, HF-2, HF-1, HF-0, VTM-2, VTM-1, VTM-0 (Reference Table 13)
I hope this is helpful. Mat Aschenberg -----Original Message----- From: Paul Smith [mailto:[email protected]] Sent: Tuesday, January 11, 2000 8:51 AM To: [email protected] Subject: UL6500 I don't hve a copy of this standard but hopefully somebody out there will and might be able to help. Can I presume that decorative parts of equipment enclosures tested to UL6500 need to meet UL94 HB as a minimum or is there anything less stringent? I only ask as I'm sure somebody has told me in the past (can't find the data anymore) that polymeric parts that don't form part of the enclosure do not need to be UL approved in their own right for 6500. Is this right or not? Thanks Paul Excite -- Control Yourself. This E-mail brought to you by Excite's free E-mail service. Get your own E-mail address at http://www.excite.co.uk --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
