Try R&S documentation especially the booklet:
Measuring EMI and wanted signals. It was published quit a long time ago, but they might want to make you a copy... Your headroom is exactly equal to their numbers. regards Gert Gremmen -----Original Message----- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of J.Feldhaar Sent: donderdag 29 november 2001 18:39 To: emc-p...@majordomo.ieee.org Subject: EMI receiver desensitization and amplitude overhead Hi all, this is my first post to the list. Greetings to all! I am looking for a URL or graphic that shows the headroom necessary for correct QP emi measurements using an EMI receiver. If my information is correct, there must be up to 43.5 dB in excess of the measurement range for measuring Quasipeak signals correctly, decreasing when pulse frequency approaches 1 KHz. I am looking for a source of information or a picture of this graphic. Note: There are three curves, one each for 200 Hz, 9 KHz and 120 KHz resolution bandwidth. Help will be appreciated. Greetings from ice-cold Germany, Jochen Feldhaar DH6FAZ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
