Hi all, this is my first post to the list. Greetings to all!
I am looking for a URL or graphic that shows the headroom necessary for correct QP emi measurements using an EMI receiver. If my information is correct, there must be up to 43.5 dB in excess of the measurement range for measuring Quasipeak signals correctly, decreasing when pulse frequency approaches 1 KHz. I am looking for a source of information or a picture of this graphic. Note: There are three curves, one each for 200 Hz, 9 KHz and 120 KHz resolution bandwidth. Help will be appreciated. Greetings from ice-cold Germany, Jochen Feldhaar DH6FAZ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
