I read in !emc-pstc that [email protected] wrote (in <LFENJLPMMJB [email protected]>) about 'SV: SV: Revised EMC standards and CE Declarations.', on Thu, 29 Nov 2001: >On the CENELEC web they say regarding EN61000-6-1: "Note:Supersedes EN >50082-1:1997". What you are telling John, I assume that they should have >written "Note: Will superseed EN 50082-1:1997".
The concept of 'superseding' is not very helpful, because it does not tell the whole story, in fact, it misses out the most important bit! When a new standard is issued, it CAN be used to demonstrate compliance from the date it is notified in the Official Journal. But it MUST be used after the 'dow' date in its Foreword, which is the 'date of cessation of presumption of conformity of the superseded standard'. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
