I would say that if it came calibrated from the manufacturer and has not suffered visible damage it should be okay. It is easy to check a few spot frequencies or use a spectrum analyzer with tracking generator or separate sweeping sig gen to check performance. Either way it is not a big deal.
on 11/28/01 4:15 PM, [email protected] at [email protected] wrote: > > We are in the process of setting up a pre-compliance EMC lab. One of the > tests that we will be performing is pre-compliance conducted emissions per > EN 61326. > > I realize that since we are only performing pre-compliance measurements > that calibration of the LISN is not required. However, do you recommend > calibrating the LISN for pre-compliance measurements? If so, why? > > Your responses are appreciated > > Regards > > Joe Martin > Applied Biosystems > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old messages > are imported into the new server. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
