We are in the process of setting up a pre-compliance EMC lab. One of the tests that we will be performing is pre-compliance conducted emissions per EN 61326.
I realize that since we are only performing pre-compliance measurements that calibration of the LISN is not required. However, do you recommend calibrating the LISN for pre-compliance measurements? If so, why? Your responses are appreciated Regards Joe Martin Applied Biosystems ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
