Those removable links can be fuses, which are a good idea to use with sidactors or MOVs anyway.
Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: Wednesday, November 28, 2001 2:28 AM To: [email protected] Subject: Re: Production Line Hipot Test for Network Powered Equipment I read in !emc-pstc that Jerry Martin <[email protected]> wrote (in <[email protected]>) about 'Production Line Hipot Test for Network Powered Equipment', on Wed, 28 Nov 2001: >Has anyone had experience with this and how do you go about removing soldered >sidactors to do the hipot test? It seems like this would be an extra step in the >manufacturing process. You probably do need to do a high voltage test, since the 190 V supply can have surges and transients on it. In other types of equipment, the surge-suppression devices are connected via removable links, which are not installed until after the test. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
