Master of the Obvious, but it sounds to me like it is an attempt to make the
current waveform (to a limited degree) follow the the voltage waveform as
opposed to being a sharp spike replenishing a filter cap.

----------
>From: "KC CHAN [PDD]" <[email protected]>
>To: <[email protected]>
>Subject: Class C harmonics testing
>Date: Thu, Nov 15, 2001, 9:59 PM
>

>
> For Class C harmonics testing(active input power <= 25 W), one requirement
> is as follows
>
> " the third harmonic current, ...; moreover, the waveform of the input
> current shall be such that it begins to flow before or at 60 deg., has its
> last peak (if there are several peaks per half period) before or at 65 deg
> and does not stop flowing before 90 deg, where the zero crossing of the
> fundamental supply voltage is assumed to be at 0 deg"
>
> Does anyone who can explain what is the purpose of this requirement?  And
> what is the meaning of stop flowing before 90 deg.
>
> thank you
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Michael Garretson:        [email protected]
>      Dave Heald                [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     No longer online until our new server is brought online and the old
> messages are imported into the new server.
> 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to