In the past I had been involved with integration of standalone products into a larger system. Ultimately my larger system would be required to be tested, and I would want it to pass. As the customer who would integrate production quantities of the standalone, I asked for the report. Those that tested their products sent it - those that didn't . . . lost a sale. In that manner, I reduced the possibility of integrating a product which could create failure that I would have to deal with.
I suppose the question would be - what is acceptable risk for you? John Juhasz -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, November 14, 2001 9:46 AM To: [email protected] Subject: CE-mark compliance Hi all, Do all manufactures fulfill the EU-directives with testing in their own facilities or by an independent test lab? I guess the answer must be No. >From my time working in a test lab, my experience is that big companies like Alcatel, Siemens and so on, do the required testing according to relevant requirements. I also got the feeling that small companies (I do not generalize) where a bit "laid-back" and often put the CE-mark into the products without any tests or with a very limited test process. Should a system builder trust a Declaration of Conformity from a big manufacturer, without asking for test reports in order to verify compliance with relevant directives ? Would you sleep well at night, if you only trusted the CE-mark 100% and build a large broadband telecom system only based on the CE-mark without any further documentation? What is your opinion? Best regards Amund Westin, Oslo/Norway ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
