CENELE lists the scope, or part of it, on its site http://www.cenelec.org/
For example, here is what they say about EN 55022: This standard applies to ITE as defined in 3.1. Procedures are given for the measurement of the levels of spurious signals generated by the lTE and limits are specified for the frequency range 9 kHz to 400 GHz for both Class A and Class B equipment. No measurements need be performed at frequencies where no limits are specified. The intention of this standard is to establish uniform requirements for the radio disturbance level of the equipment contained in the scope, to fix limits of disturbance, to describe methods of measurement and to standardize operating conditions and interpretation of results. Richard Woods Sensormatic Electronics -----Original Message----- From: Stuart Lopata [mailto:[email protected]] Sent: Thursday, November 01, 2001 4:00 PM To: emc Subject: general product classification If I have product xyz (generic) how do I go about finding the relevant standards that it must comply with for EN-BS/IEC/ETSI (European)? Of course, simply by looking at the list of standards titles I can get somewhat of an idea if they are relevant. However, I cannot view their scope without buying the standard first. Any ideas? Sincerely, Stuart Lopata Rookie Compliance Engineer ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
