This is all I could find on the IEC website:

"This first edition of IEC 60950-1 (10-01) cancels and replaces the third
edition of IEC 60950, issued in 1999, and constitutes a technical revision"

Sincerely,

Nick Momcilovic
Product Safety Coordinator
Engineering Technical Services

QTI
N64W23110 Main Street
Sussex, WI 53089-5301
USA

Phone:  +1-414-566-7915
Fax:  +1-414-566-9576
mailto:[email protected]
http://www.qtiworld.com


-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Friday, October 26, 2001 8:25 AM
To: [email protected]
Subject: IEC 60950-1 released



Safety folks,

The safety standard IEC 60950-1 (Information technology equipment - Safety -
Part 1: General requirements) was released by IEC on October 25th 2001.

Is this a new version of the existing IEC60950:1999 ?

Best regards
Amund Westin, Oslo/Norway



-----Opprinnelig melding-----
Fra: [email protected]
[mailto:[email protected]]På vegne av Dan Kwok
Sendt: 14. oktober 2001 20:35
Til: Andrea Bishop; [email protected]
Emne: Re: 2 GHz Amplifiers



Does anyone have an idea on when the cessation date for EN 300-339 will be
once EN 301-498 V1.3.1 becomes harmonized?


----- Original Message -----
From: "Andrea Bishop" <[email protected]>
To: <[email protected]>
Sent: Wednesday, October 10, 2001 12:22 AM
Subject: FW: 2 GHz Amplifiers


>
> ETSI EN 301 489-1 V 1.3.1 was formally published by ETSI on 26 September
> 2001 and is therefore no longer Final Draft.
>
> According the the ETSI work programme, it was delivered to the Commission
on
> 27 September and is due to be cited in the Official Journal on 31 October.
> It will then be a harmonised standard.
>
> regards
>
> Andrea Bishop
> TUV Product Service Ltd
> Fareham, Hants



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to