Hope you're using more than one sample. I've been bit by having the one I
brought to the lab not being in compliance. Anyway, make certain.
- Robert -
Robert A. Macy, PE [email protected]
408 286 3985 fx 408 297 9121
AJM International Electronics Consultants
619 North First St, San Jose, CA 95112
-----Original Message-----
From: Alex McNeil <[email protected]>
To: [email protected] <[email protected]>
List-Post: [email protected]
Date: Monday, October 22, 2001 4:06 AM
Subject: EFT Failures..Help!
>
>Hi Guys,
>
>I am at an EMC test centre today and tomorrow. Unfortunately, my product
>failed EFT testing on the AC power port at 1KV. This is for various
>combinations of Line, Neutral and Earth (L, N, E, LN, LE, NE and LNE)
>
>My product is Class II, no Earth. It is supplied by an external power
>supply. This supplies SELV to my product. The power supply manufacturer has
>stated that his power supply meets EN61000-4-4 for 2KV and has emailed me
>this report to verify this.
>
>Has anyone got a quick solution to my problem so that I can implement here
>at the EMC test house?
>
>Kind Regards
>Alex McNeil
>Principal Engineer
>Tel: +44 (0)131 479 8375
>Fax: +44 (0)131 479 8321
>email: [email protected]
>
>
>-------------------------------------------
>This message is from the IEEE EMC Society Product Safety
>Technical Committee emc-pstc discussion list.
>
>Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
>
>To cancel your subscription, send mail to:
> [email protected]
>with the single line:
> unsubscribe emc-pstc
>
>For help, send mail to the list administrators:
> Michael Garretson: [email protected]
> Dave Heald [email protected]
>
>For policy questions, send mail to:
> Richard Nute: [email protected]
> Jim Bacher: [email protected]
>
>All emc-pstc postings are archived and searchable on the web at:
> No longer online until our new server is brought online and the old
messages are imported into the new server.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
