An ESD question or two... For SAE J1113-13 and ISO 10605: Are air discharges directed to non-metal surfaces only as in IEC 61000-4-2? Or are both air and contact discharges directed to metal contact locations? (This may sound like a silly question, but the SAE/ISO specifications are not clear on this point )
Regards, Ron Chernus Compliance Engineer, DENSO ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
