Enclosure manufacturers normally stock filter material and accessories. Try http://www.rittal-corp.com/
Andy. > > -----Original Message----- > > From: Chris Maxwell [SMTP:[email protected]] > > Sent: 16 October 2001 15:39 > > To: EMC-PSTC Internet Forum > > Subject: Air Filter Material > > > > > > Hi All, > > > > We are looking to find a "safe" material to use to filter dust/lint ... > > from fan openings in a product chassis. > > > > I have talked to our mechanical engineer, the ideal material would: > > 1. Serve to filter dust/lint from air coming into our chassis. (I don't > > have an exact spec for particle size.) > > 2. The material would be die cuttable so that we could have a shop cut > > different configurations of it in large quantities. > > 3. About 1/8" to 1/16" thick. > > 4. Non hygroscopic (won't absorb water) > > 5. Non-flammable. > > 6. Slightly compressible (We would want to deflect the material > > possibly 10% or so just to hold it in place. I would assume a maximum > > desired deflection of 25%.) > > 7. Strong (i.e. we don't want it to rip or tear) > > > > Does anybody know of a material that comes close to what we want? > > > > AdTHANKSvance for your help. > > > > Best Regards, > > > > Chris Maxwell | Design Engineer - Optical Division > > email [email protected] | dir +1 315 266 5128 | fax +1 315 797 > > 8024 > > > > NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA > > web www.nettest.com | tel +1 315 797 4449 | > > > > > > > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: [email protected] > > Dave Heald [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > Jim Bacher: [email protected] > > > > All emc-pstc postings are archived and searchable on the web at: > > No longer online until our new server is brought online and the old > > messages are imported into the new server. > > > ************************************************************** > Please visit us at www.tagmclaren.com > ************************************************************** > > The contents of this E-mail are confidential and for the exclusive > use of the intended recipient. If you receive this E-mail in error, > please delete it from your system immediately and notify us either > by E-mail, telephone or fax. You should not copy, forward or > otherwise disclose the content of the E-mail. > > TAG McLaren Audio Ltd > The Summit, 11 Latham Road > Huntingdon, Cambs, PE29 6ZU > Telephone : 01480 415600 (+44 1480 415600) > Facsimile : 01480 52159 (+44 1480 52159) > > ************************************************************** > Please visit us at www.tagmclaren.com > ************************************************************** > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at:> > No longer online until our new server is brought online and the old > messages are imported into the new server. > > This e-mail and its contents may be confidential, privileged and protected by law. Access is only authorised by the intended recipient. The contents of this e-mail may not be disclosed to, or used by, anyone other than the intended recipient, or stored or copied in any medium. If you are not the intended recipient, please advise the sender immediately. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
