No problem - Ask WHO places it on the market?
YES SOMEONE must register BEFORE applying the C-TICK mark If your contract requires you to supply the product WITH approval in place then you must do it. If you client is badging the product and placing it on the market then they MUST have their name on the approval. Hence they can apply to the authority - alternatively (they can ask you to apply and have them listed). There are a lot of considerations - I am currently writing a newsletter on this subject! DESIGN CONTROL is the MAJOR issue. Best regards Gregg Gregg Kervill DipIM, MIMgt, MIEEE VP Engineering Eurolink Ltd. 2317 Westwood Ave., Suite 204, Richmond, VA. 23230 USA Phone (804) 353-0050 - 804 453 3141 Fax (804) 353 9755 -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Dave Heald Sent: Wednesday, September 19, 2001 12:19 PM To: [email protected] Subject: Importing to Australia with a twist Greetings all, I have an unusual question. Say my company was to sell an IT product to a North American or European client who then would place the product in Australia. We meet all of the EMC & Safety requirements for Australia and have documentation, but here is the difficulty: Does my company need an agent/representative in Australia, or would our client suffice for these purposes? Also, do I need to register or otherwise apply with Australia before applying the C-Tick mark? (I assume yes but have been unable to find contact information) Best Regards, Dave Heald ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
