Does anyone have a feel for how close the spacing requirements in ETS 300 119 have to be met? There doesn't seem to be any tolerances, mins or maxes, i.e. the implication is that all dimensions must be met exactly.
Anyone fallen down in Europe over this? Also, in ETS 300 119-4 it seems that D1 is incorrectly marked, i.e. D1 should be the entire depth, not the front part. Thanks in advance, Dave Wilson Alidian Networks ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
