I read in !emc-pstc that Ken Javor <ken.ja...@emccompliance.com> wrote (in <20010816231829.IKX2732.femail28.sdc1.sfba.home.com@[65.11.150.27]>) about 'EMC and power supply', on Thu, 16 Aug 2001: > So one question is how much do you load the power >supply when you test it - you may want to load it just as your ITE product >does.
AFAIK this is specified in EN55022 - full rated load. You can add resistive load if the power supply is under-run in the configuration being tested. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Eat mink and be dreary! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"