Daren, thanks for pointing out the EN 55014 series includes battery chargers. I missed that. Yes, these are the appropriate product family standards and would take precedence over the generic standards. The harmonics and flicker standards still apply.
One caveat: If the equipment includes digital circuits with clocks above 9 kHz, then the generic emission standard would apply since it specifies that both EN 55022 and EN 55014-1 are to be used for emissions. Richard Woods ---------- From: Darren Pearson [SMTP:dar...@genesysibs.com] Sent: Thursday, August 16, 2001 4:14 AM To: EMC-PSTC Subject: Fw: Testing for the EMC directive You might find the following standards of use, EN55014-1 and EN55014-2 they have a section for Battery chargers. regards Darren. Darren Pearson Radio & Telecom Approval Services Genesys email: dar...@genesysibs.com web: www.genesysibs.com ----- Original Message ----- From: <wo...@sensormatic.com> To: <emc-p...@majordomo.ieee.org> Sent: Wednesday, August 15, 2001 4:16 PM Subject: RE: Testing for the EMC directive > > The following EMC standards would apply: > > EN 50081-1:1992, Generic Emissions > EN 50082-1:1997, Generic Immunity > EN 61000-3-2:1995, Power line harmonics emissions > EN 61000-3-3:1995, Power line flicker emissions > > If the power level of the device is low, actual testing to the power line > standards may not be necessary. > > Richard Woods > > ---------- > From: Stuart Lopata [SMTP:stu...@timcoengr.com] > Sent: Wednesday, August 15, 2001 10:00 AM > To: emc > Subject: Testing for the EMC directive > > I have a consumer battery charger. What set of tests need to be > done for CE mark approval? > > Sincerely looking for answers, > > Stuart Lopata > Timco Engineering > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: pstc_ad...@garretson.org > Dave Heald davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"