Hi all, I have an EMScan system that I used for debugging boards. I have mixed feelings, but for somethings it really helps. If anyone would like their board scanned to see if it would help them, let me know off line: I'm really cheap;-))))
As for high frequency, the resolution of the grid is one limitation, but remember you only scan, reliably, the back side of the board.... the component side has too great a skyline to give good results. Dos show the hot chips though;-)))) Derek Walton ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
