Okay, here's what I'd like to have ... Translucent material which is color responsive to emi. Similar to the material on the side of batteries which responds to voltage levels.
A pane of translucent material which can be put on the end of a stick much like a pane of glass or a pane of of it which could be stood from a floor support next to the product and show a pattern of emi strengths by color. Or, a thin sheet of it much like plastic wrap which can be placed on a part of a product (such as a surface or edge) which would also respond to field strength. Or, I could rip off a sheet much like plastic wrap about a foot long and place over a pcb and instantly "see" the emi patterns produced by the board. Near or far field use. There'd be 2 versions of the material: one for electric fields which would respond with various shades of red and another for magnetic fields which would respond in various shades of blue. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
