An ETSI representative told me that he thought that most all EU labs have
upgraded their chambers and equipment and are now ready to test. That same
person asked if the US labs were also ready?
Let's hear from both sides of the Atlantic. Are you prepared?
Richard Woods
----------
From: [email protected]
[SMTP:[email protected]]
Sent: Tuesday, August 07, 2001 1:20 PM
To: [email protected]
Subject: RE: ETSI EMC Standard
Regarding the change in the standard, has anyone started to look
into an
upgrade to their compact chambers for stre-e-e-etching the frequency
to 2
GHz? If so, what upgrades did you find most cost effective for
* signal generator
* amplifier
* antenna
* sensor
* e-field probe
* chamber lining modifications
Perhaps we can develop a database of options and trade-offs before
we need
to spend the big bucks.
Don Umbdenstock
Sensormatic ?
> ----------
> From: [email protected][SMTP:[email protected]]
> Reply To: [email protected]
> Sent: Tuesday, August 07, 2001 10:15 AM
> To: [email protected]
> Subject: ETSI EMC Stadard
>
>
> The final draft of the proposed revision of ETSI EN 301 489-1 is
in the
> voting stage. This standard sets the emissions and immunity
requirements
> for
> most all transmitters. A major change has been made to the
radiated
> immunity
> requirements by adding the frequencies between 1400 MHz and 2000
MHz. I
> was
> told that this change is being driven by CISPR and may be based
upon a
> CISPR
> standard. Does anyone have any information in this regard?
>
> Richard Woods
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
> [email protected]
> with the single line:
> unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
> Michael Garretson: [email protected]
> Dave Heald [email protected]
>
> For policy questions, send mail to:
> Richard Nute: [email protected]
> Jim Bacher: [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.rcic.com/ click on "Virtual Conference Hall,"
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
