Hi, My guess is that it has to do with the Machinery Directive. See Article 4, paragraph 2 and point B of Annex II. This deals with machinery "...that it is intended to be incorporated into machinery or assembled with other machinery to constitute machinery covered by this Directive..."
Ned Devine Program Manager III Entela, Inc. 3033 Madison Ave. SE Grand Rapids, MI 49548 616 248 9671 Phone 616 574 9752 Fax [email protected] e-mail -----Original Message----- From: Veit, Andy [mailto:[email protected]] Sent: Thursday, June 28, 2001 2:28 PM To: [email protected] Subject: Certificate of Incoorporation??? Hello- Can someone explain to me what a "Certificate of Incorporation" is? One of our vendors wants to supply this in lieu of an "EU Declaration of Conformity" for CE compliance. Can someone enlighten me? Thanks again- -Andy Andrew Veit Systems Design Engineer MTS Systems Corp Ph: 919.677.2507 Fax: 919.677.2480 1001 Sheldon Drive Cary, NC 27513 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
