<31891b757c09184bbfec5275f85d5595fd8...@cceexc18.americas.cpqcorp.net>, Lesmeister, Glenn <glenn.lesmeis...@compaq.com> inimitably wrote: >I'd like the 30A working current to come from a single product using an >IEC309 type plug (no 13A fuses). Is this possible in the UK? Would I have >to run a separate dedicated source to do this?
Yes, if, presumably, it is a product intended for use in commercial or industrial premises. Household equipment (like a 7 kW power shower) with such a current rating would be hard-wired to a dedicated branch. -- Regards, John Woodgate, OOO - Own Opinions Only. Phone +44 (0)1268 747839 Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not call a vertically- applied manulo-pedally-operated quasi-planar chernozem-penetrating and excavating implement a SPADE? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"