Forwarded for Susanne Delisle. Please cc Susanne ([email protected]) on any replies
-------- Original Message -------- Subject: Field wiring terminal size List-Post: [email protected] Date: Fri, 8 Jun 2001 10:09:11 -0400 From: "Delisle, Susanne" <[email protected]> To: [email protected] Group, I'm in the process of specifying field wiring terminals for a -48Vdc product that's rated 100A. Table 3E in 60950 only specifies sizes up to 63 A. Does anyone know how I go about sizing a terminal for the higher current? Susanne Delisle Product Safety Engineer Unishpere Networks 10 Technology Park Drive Westford, MA 01886 (978) 589-0349 (978) 589-0800 fax [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
