There's an article by B. Archambeault and C. Brench, entitled, "Shielded Air
Vent Design Guidelines from EMI Modeling" in IEEE Int. Symp. On EMC, Dallas
Tex., Aug. 1993, p.195.
This article is referenced in a 1994 IEEE article entitled: "Modeling
Leakage Through Finite Apertures with TLM by Clifford H. Draft.
Max Kelson
Evans & Sutherland
-----Original Message-----
From: Brench, Colin [mailto:[email protected]]
Sent: Wednesday, June 06, 2001 5:36 AM
To: Neven Pischl; [email protected];
[email protected]
Subject: RE: Shielding Effectiveness Question
Greetings Neven,
There are a couple of things that need to be considered when
you have an
rf source close to a shield with apertures. First is the
"shielding"
properties of the shield as people have said this is very
dependent upon
the field impedance when you are in the near field. Second
and no less
important is the direct coupling between the shield and
source
conductors, the presence of the shield greatly affects the
properties of
the radiating source.
With everything so close together there could well be
resonances which
result in windows in the shield at lower frequencies than
you would
expect. Some years ago I published a paper with my wife
(Colin and
Bronwyn Brench) on the effects of conductors close to
apertures in a
shield which illustrates this effect. The paper used very
simple
geometries not real ones and used a field source not a local
one - but
the premise was the same. It can be found in the EMC
Symposium record -
sorry I don't know what year - it won't help you directly,
only show
what behavior you might expect. I believe that to get an
answer to your
question you can only go so far analytically and that to get
a detailed
answer you will have to resort to a computational
electromagnetics tool.
It is important to accurately represent your EMI source,
physically and
electrically (I.e. source impedance) to get accurate
results.
good luck with this,
Colin.
-----Original Message-----
From: Neven Pischl [mailto:[email protected]]
Sent: Tuesday, June 05, 2001 12:16 PM
To: [email protected]; [email protected]
Subject: Shielding Effectivness Question
I would appreciate if anyone could let me know if there are
any
references (books, application notes, anythig ..) that deal
with
shielding efectivness in cases when a source is close to an
(electrically small) opening in a shield (enclosure). In
such a
situation, the field will penetrate through the hole and
leak even if
the size is much smaller than the wavelength. I am
particularly
interested in situation when high-frequency source, such as
a PCB edge
or a component operating at (say) 1 GHz and above is in
proximity of the
venting holes, "small" gaps in the chassis etc.
All references that I have deal with uniform plane wave
propagating
incident to a metal plane with a slot or hole, in which case
it is
enought o have electrically small size of the opening (e.g.
lambda/10)
to efficiently block any field propagation through the
barrier. I can't
find any useful reference that deals in any analytical way
with the
situation I am intersted in.
I believe I might get some answers using some of the
simulation
programs, but at the moment I am more intersted in the
analysis of the
problem than in simulating it.
Thank you,
Neven Pischl
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at:
http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web
at:
http://www.rcic.com/ click on "Virtual Conference
Hall,"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
