<[email protected]>, Griffith, Monty J <[email protected]> inimitably wrote: >Does anyone know what the vibration requirements for this standard are? >(Sine,half Sine, triangle, frequency and amplitude, how many G's the >equipment must withstand) I also saw where it was equal to MIL-STD-1399, is >that true? Any help would be appreciated. Thanks!!!
You should buy the standard. It is unwise to rely on paraphrased and often greatly abbreviated information from a mail list. -- Regards, John Woodgate, OOO - Own Opinions Only. Phone +44 (0)1268 747839 Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not call a vertically- applied manulo-pedally-operated quasi-planar chernozem-penetrating and excavating implement a SPADE? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
