We returned our EMC-30 a few years back because we found it would not remain
in calibration on our OATS during our hot and humid days in Florida.
----------
From: Ken Javor [SMTP:[email protected]]
Sent: Wednesday, May 23, 2001 3:00 PM
To: Wolak, Marvin; EMC-PSTC Newsgroup (E-mail)
Subject: Re: CISPR Compliant Spectrum analyzer/receiver
I would look at the Electrometrics EMC-30 and the Carnel NM 17/27.
I think
these have built-in quasi-peak detection, but I'm not sure. Both of
these
machines have tunable front ends (built-in preselection).
----------
>From: "Wolak, Marvin" <[email protected]>
>To: "EMC-PSTC Newsgroup (E-mail)" <[email protected]>
>Subject: CISPR Compliant Spectrum analyzer/receiver
>Date: Wed, May 23, 2001, 11:11 AM
>
>
> I need to rent a CISPR 16 compliant spectrum analyzer/receiver
over the
> frequency range 0.15 - 30 MHz.
>
> Any suggestions?
>
> I'm familiar with the good ol' HP 8566 / 8568 (Do I need the
preselector
> with them for CISPR 16 compliance?), and the R&S ESI.
>
> What else may be out there available in the rental shops?
>
> Thanks,
>
> Marvin Wolak
> Marconi Networks
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
> [email protected]
> with the single line:
> unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
> Michael Garretson: [email protected]
> Dave Heald [email protected]
>
> For policy questions, send mail to:
> Richard Nute: [email protected]
> Jim Bacher: [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.rcic.com/ click on "Virtual Conference Hall,"
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
