Another option might be to use a variac (adjustable auto transformer) to adjust the input.
-----Original Message----- From: Kenneth McCormick [mailto:[email protected]] Sent: Thursday, May 10, 2001 4:26 PM To: [email protected] Subject: Re: looking for used power supply It sounds like Mike is looking for a power supply to provide power to test electrical devices (not a power supply to be installed in a product). I Interpret Mikes E-mail to be: The power supply should be able to supply 50-60Hz (when connected to a 60Hz supply, 3 phase supply (likely 120/208)) Single phase output variable over the range of 120-240V (Mike, I would suggest looking for something that can provide 90-260V) 16A Max (which would give you approximately 3KVA @ 240V (3840VA to be exact) Mike, Have you tried Elgar, Pacific Power, TestMart, or TestEquity? I have a 1.5KVA Elgar unit that I purchased used several years ago. They are VERY Hard to come by used (And rather expensive if purchased new) Are you set on using something that is powered from the AC Mains, or would you be willing to consider a Diesel Generator? Ken ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
