There is a point where the tolerances on the AWG and the metric sizes overlap and allow a single cord to be approved as both SJT and HO5VV in North America and Europe. Australia will accept the Eurpoean cable.
I know it is made by Feller Lou Aiken 27109 Palmetto Drive Orange Beach, AL 36561 U.S.A. tel 1-334-981-6786 fax 1-334-981-3054 mobile 1-334-979-4648 ----- Original Message ----- From: Fleury, Bill <[email protected]> To: 'Russell, Ray' <[email protected]>; 'Cameron O'phee' <O'[email protected]>; 'EMC - PSTC Forum' <[email protected]> Sent: Wednesday, May 02, 2001 12:21 PM Subject: RE: Australian power cable requirements. > > I believe wire gauge might be an issue as well. > > Bill Fleury > > -----Original Message----- > From: Russell, Ray [mailto:[email protected]] > Sent: Wednesday, May 02, 2001 6:46 AM > To: 'Cameron O'phee'; 'EMC - PSTC Forum' > Subject: RE: Australian power cable requirements. > > > > Cameron, > > I had a similar situation some time ago with an internal cable and it had to > do with the insulation thickness. The SJT cord was only rated 300V, and the > insulation thickness did not meet the European standard. We changed to a > 600V cord, which was accepted. > > Ray Russell > [email protected] > > -----Original Message----- > From: Cameron O'phee [mailto:O'[email protected]] > Sent: Tuesday, May 01, 2001 8:23 PM > To: 'EMC - PSTC Forum' > Subject: Australian power cable requirements. > > > > Hi All, > > I have a situation where the test house I normally use for safety will > accept SJT cordage for an internal power cable but a different test house > will not. The power cable conducts 240v from one power supply to another, > with both supplies internal to the machine. The second test house insists > that the cordage must be H05VVF. Consequentely, I would like to know the > difference in requirements between the US SJT cordage and European H05VVF. > > Regards, > > Cameron O'Phee. > EMC & Safety Precompliance. > Aristocrat Technologies Australia. > > > Telephone : +61 2 9697 4420 > Facsimile : +61 2 9663 1412 > Mobile : 0418 464 016 > > > > ---------------------- > CONFIDENTIALITY NOTICE > ---------------------- > This email is intended only to be read or used by the addressee. > The information contained in this e-mail message may be confidential > information. If you are not the intended recipient, any use, interference > with, distribution, disclosure or copying of this material is unauthorised > and prohibited. Confidentiality attached to this communication is not waived > or lost by reason of the mistaken delivery to you. > > If you have received this message in error, please delete it and notify us > by return e-mail or telephone Aristocrat Technologies Australia Pty Limited > on +61 2 9413 6300. > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
