According to EN60825, for a Class I product all you need is the label
stating "Class I laser product" unless the product is too small to bear the
label in which case you can put in the user manual.  The word "warning"
isn't necessary.  The label doesn't have to be black on yellow either.

Regards

Chris Colgan
Compliance Engineer
TAG McLaren Audio Ltd
The Summit, Latham Road
Huntingdon, Cambs, PE29 6ZU
*Tel: +44 (0)1480 415 627
*Fax: +44 (0)1480 52159
* Mailto:[email protected]
* http://www.tagmclarenaudio.com


> -----Original Message-----
> From: Gorodetsky, Vitaly [SMTP:[email protected]]
> Sent: 30 April 2001 16:54
> To:   'John Woodgate'; Peter Merguerian
> Cc:   'mike harris'; [email protected]
> Subject:      RE: ITE Laser Markings
> 
> 
> These are all fine.  However, I could not find a requirement for adding to
> neither the label nor "the statement in the information for the user"  for
> Class 1 Laser Product the word "Warning, Waarschuwing, etc."   In fact,
> "Caution" is recommended for radiation in excess of the AEL for Class 1.
> Warning is a very strong safety term and I would not advise to use it
> unless
> it is required.
> 
> Best Regards,
> Vitaly  Gorodetsky
> Compliance Engineer                   Direct: (818) 678-3840
> Canoga Perkins Corp.                  Main:   (818) 718-6300
> 20600 Prairie Street                  FAX:    (818) 678-3740
> Chatsworth, CA 91311-6008                             e-mail:
> [email protected] <mailto:[email protected]>        
> 
> The suitability of this information for making decision is solely with the
> reader
> 
> 
>               -----Original Message-----
>               From:   John Woodgate [mailto:[email protected]]
>               Sent:   Sunday, April 29, 2001 11:56 AM
>               To:     Peter Merguerian
>               Cc:     'mike harris'; [email protected]
>               Subject:        Re: ITE Laser Markings
> 
> 
>       
> <[email protected]>, Peter
>               Merguerian <[email protected]> wrote:
>               >Warning Class 1 laser product.
>               English
>               > 
>               >Waarschuwing   Klasse-1 laser produkt.
>               Dutch
>               >
>               >Varoitus   Luokan 1 lasertuote.
>               Finnish
>               >
>               >Attention   Produit laser de classe 1.
>               French
>               >
>               >Warnung   Laserprodukt der Klasse 1.
>               German
>               >
>               >Avvertenza   Prodotto laser di Classe 1.
>               Italian
>               >
>               >Advarsel   Laserprodukt av klasse 1.
>               Norwegian
>               >
>               >Aviso   Produto laser de classe 1.
>               Portuguese
>               >
>               >Advertencia!   Producto láser Clase I.
>               Spanish
>               >
>               >Varning!   Laserprodukt av klass 1.
>               Swedish.
> 
>               I don't see Danish or Greek there. The Danish may be nearly
> identical
>               with the Norwegian or Swedish.
>               -- 
>               Regards, John Woodgate, OOO - Own Opinions Only. Phone +44
> (0)1268 747839
>               Fax +44 (0)1268 777124. http://www.jmwa.demon.co.uk Why not
> call a vertically-
>               applied manulo-pedally-operated quasi-planar
> chernozem-penetrating and 
>               excavating implement a SPADE?
> 
>               -------------------------------------------
>               This message is from the IEEE EMC Society Product Safety
>               Technical Committee emc-pstc discussion list.
> 
>               Visit our web site at:
> http://www.ewh.ieee.org/soc/emcs/pstc/
> 
>               To cancel your subscription, send mail to:
>                    [email protected]
>               with the single line:
>                    unsubscribe emc-pstc
> 
>               For help, send mail to the list administrators:
>                    Michael Garretson:        [email protected]
>                    Dave Heald                [email protected]
> 
>               For policy questions, send mail to:
>                    Richard Nute:           [email protected]
>                    Jim Bacher:             [email protected]
> 
>               All emc-pstc postings are archived and searchable on the web
> at:
>                   http://www.rcic.com/      click on "Virtual Conference
> Hall,"
> 
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
> 
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
> 
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
> 
> For help, send mail to the list administrators:
>      Michael Garretson:        [email protected]
>      Dave Heald                [email protected]
> 
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
> 
> All emc-pstc postings are archived and searchable on the web at:
>     http://www.rcic.com/      click on "Virtual Conference Hall,"


**************************************************************  
           Please visit us at www.tagmclarenaudio.com
**************************************************************

The contents of this E-mail are confidential and for the exclusive
use of the intended recipient. If you receive this E-mail in error,
please delete it from your system immediately and notify us either
by E-mail, telephone or fax. You  should not  copy, forward or 
otherwise disclose the content of the E-mail.

TAG McLaren Audio Ltd
The Summit, 11 Latham Road
Huntingdon, Cambs, PE29 6ZU
Telephone : 01480 415600 (+44 1480 415600)
Facsimile : 01480 52159 (+44 1480 52159)

**************************************************************  
           Please visit us at www.tagmclarenaudio.com
**************************************************************

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.rcic.com/      click on "Virtual Conference Hall,"


Reply via email to