The scope of the standard says it applies to equipment intended to be
connected to "public low-voltage distribution systems of between 220 V and
250 V at 50 Hz line to neutral." Therefore, it does not apply if your
equipment is intended for an industrial application where power is drawn
from other than the described public system - i.e. a higher voltage grid.
Richard Woods
----------
From: Biggs, Daniel (IndSys, GEFanuc, NA)
[SMTP:[email protected]]
Sent: Friday, April 27, 2001 2:01 PM
To: '[email protected]'
Subject: Voltage fluctuations and flicker 61000-3-3
Is anyone familiar with this test and its applicability to control
and display station equipment used for automation? Is this test appropriate
for this type of equipment?
Thanks,
DB
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
