Andrew
Yes I would, and do, test this type of equipment to EN61326. It is the product specific EMC standard for Electronic Equipment for measurement, control and laboratory use. I believe you can still use the generic standards, but can not see why anyone would no the product specific has been listed in the OJ. Extra tests you should consider, are off course the safety aspect to meet the Low voltage Directive. Again, for this type of equipment I tend to use EN61010-1. I find it more suited for "professional" level test equipment than EN60950. [email protected] wrote: > Hi everybody, > > As someone who mainly works to EFA, Mil 461, Def Stan 59-41 & RTCA/DO-160 > Specifications I am looking for information on getting some test equipment > to meet the EU directives. The test equipment to be supplied to a customer > for ues on their premisis and will be used to test mil equipment. Test > equipment has 240V 50Hz supply and a single cable bundle to the EUT. > > I assume the appropriate standard for this is BSEN/IEC 61326-1:1997 (is this > the latest?) so can anyone tell me what extra tests are required to ensure > compliance? > > Regards > > Andrew Price > EMC SPECIALIST > BAE SYSTEMS Avionics > e-mail <[email protected]> > > ************************************************************************************** > > This email and any attachments are confidential to the intended > recipient and may also be privileged. If you are not the intended > recipient please delete it from your system and notify the sender > immediately by telephoning +44(1252) 373232. You should not copy it or > use it for any purpose nor disclose or distribute its contents to any > other person. > > ************************************************************************************** > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.rcic.com/ click on "Virtual Conference Hall," -- Andrew Carson - Product Safety Engineer Xyratex Engineering Laboratory Tele 023 92496855 Fax 023 92496014 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
