Richard,
   In answer to the original query, I read A14 and equipment under 75W is exempt
from 61000-3-2. I found no such exemption for 61000-3-3. Regards   -Barr

[email protected] wrote:

> Mike, first of all, the use of harmonized standards is voluntary. You may
> choose not to use them and find some other means to demonstrate compliance
> with the essential requirements of the EMC Directive. If you choose to use
> the harmonized standard, you must use the latest revision that provides the
> presumption of conformity. What revision is that? It includes any and all
> amendments that have a date of withdrawal (dow) that has expired. The dow
> for A14 will not expire until 2004-01-01. You can find the dow in A14 and
> you can also find the list of harmonized standards published in the OJ with
> the dows listed. A new list was published this week.
>
> Check out
> http://europa.eu.int/comm/enterprise/electr_equipment/emc/index.htm
> <http://europa.eu.int/comm/enterprise/electr_equipment/emc/index.htm>
>
> Richard Woods
>
> ----------
> From:  Mike Stone
> Sent:  Thursday, April 05, 2001 4:57 PM
> To:  [email protected]
> Subject:  A14 documentation
>
> Good Afternoon,
> Are all products under 16 Amps required to be tested to A 14 of 6100-3-2 and
> 6100-3-3? If so, where can I find the exact documentation that states this.
> Thank you in advance.
>
> Best Regards,
>
>
> Michael Stone
> L. S. Compliance
> W66 N220 Commerce Court
> Cedarburg, WI  53012
> V       262-375-4400
> F       262-375-4248
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Michael Garretson:        [email protected]
>      Dave Heald                [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://www.rcic.com/      click on "Virtual Conference Hall,"


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        [email protected]
     Dave Heald                [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.rcic.com/      click on "Virtual Conference Hall,"


Reply via email to