---------------------- Forwarded by Robert E. Heller/US-Corporate/3M/US on
02/12/2001 05:37 AM ---------------------------
Robert E. Heller
02/12/2001 05:27 AM
3M Product Safety, St. Paul, MN 55107
76-1-01
EMC Laboratory Fax: 651-778-6252
To: Benoit Nadeau <[email protected]>
cc:
Subject: Re: IEC and EN 61000-6-2 (Document link: Robert E. Heller)
I have a copy of BS EN 61000-6-2:1999. It does not reference ENV 50204 nor
does it reference any digital radio telephone frequencies for testing. The
normative reference is EN 61000-4-3:1996 (see Annex ZA).
The test specifications indicate:
* 80 to 1000 MHz
* 10 volts per meter
* 80% AM modulation at 1kHz
* Performance criteria A
One note applies to Europe:
Note 3 - Except for ITU broadcast frequency bands 87 MHz to 108 MHz, 174
MHz to 230 MHz, and 470 MHz to 790 MHz, where the level shall be 3 V/m.
The DOW is 1.4.2002
Benoit Nadeau <[email protected]> on 02/09/2001 09:36:47 AM
Please respond to Benoit Nadeau <[email protected]>
To: [email protected]
cc: (bcc: Robert E. Heller/US-Corporate/3M/US)
Subject: IEC and EN 61000-6-2
Bonjour de Montréal,
I just bought the new generic Immunity Standard for industrial environment
but, unfortunately, I ordered the IEC version of it, not the EN version.
Obviously, an IEC standard would not reference an ENV standard and I know
that EN500082-2 referenced ENV50204.
Is it still the case for EN61000-6-2 ? Did they change the level?
Your help will be appreciated,
Regards,
----------------------------------------------
Benoît Nadeau, ing. M.ing (P.eng., M.eng.)
Conformity Group Manager
Matrox
1055, boul. St-Regis
Dorval (Québec)
Canada H9P 2T4
Tel: (514) 822-6000 (x2475)
Fax: (514) 822-6275
<http://www.matrox.com>
Chairman
2001 IEEE EMC International Symposium on
Electromagnetic Compatibility
Montreal August 13 to 17, 2001
<http://www.2001emcmtl.org>
----------------------------------------------
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
