forwarding for [email protected]
____________________Reply Separator____________________
Subject: RE: IEC and EN 61000-6-2
Author: "Hougaard; Niels" <[email protected]>
List-Post: [email protected]
Date: 2/9/01 5:56 PM
Hi Benoît,
the EN 61000-6-2:1999 has the text ("Endorsement notice"): "The text of the
International Standard IEC 61000-6-2:1999 was approved by CENELEC as a
European Standard without any modification."
So they must be identical except for the reference to basic standards where
the EN standard refers to the EN versions whereas the IEC standard refers to
the IEC versions.
For Radiated Susceptibility the basic standard in EN 61000-6-2 is EN
61000-4-3 which is a modified version of IEC 61000-4-3.
Hope this can be of some help,
Regards,
Niels Hougaard
BarcoNet
> -----Original Message-----
> From: Benoit Nadeau [SMTP:[email protected]]
> Sent: 9. februar 2001 16:37
> To: [email protected]
> Subject: IEC and EN 61000-6-2
>
>
> Bonjour de Montréal,
>
> I just bought the new generic Immunity Standard for industrial environment
>
> but, unfortunately, I ordered the IEC version of it, not the EN version.
>
> Obviously, an IEC standard would not reference an ENV standard and I know
> that EN500082-2 referenced ENV50204.
>
> Is it still the case for EN61000-6-2 ? Did they change the level?
>
> Your help will be appreciated,
>
> Regards,
>
>
> ----------------------------------------------
> Benoît Nadeau, ing. M.ing (P.eng., M.eng.)
> Conformity Group Manager
> Matrox
> 1055, boul. St-Regis
> Dorval (Québec)
> Canada H9P 2T4
> Tel: (514) 822-6000 (x2475)
> Fax: (514) 822-6275
> <http://www.matrox.com>
>
> Chairman
> 2001 IEEE EMC International Symposium on
> Electromagnetic Compatibility
> Montreal August 13 to 17, 2001
> <http://www.2001emcmtl.org>
> ----------------------------------------------
>
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
