Go to: Panel Components Corporation P.O. Box 115, Oskaloosa, IA 52577 (U.S.A)E-mail: Phone: 641-673-5000 http://www.panelcomponents.com <http://www.panelcomponents.com/scripts/wsisa.dll/P80FORM.p?w_part=88010200>
For a picture of the connector: http://www.panelcomponents.com/scripts/wsisa.dll/P80FORM.p?w_part=88010200 <http://www.panelcomponents.com/scripts/wsisa.dll/P80FORM.p?w_part=88010200> For a drawing: http://www.panelcomponents.com/drawings/88010120.pdf <http://www.panelcomponents.com/drawings/88010120.pdf> Tony Anton (Tony) Nikolassy Project Engineer, CB Scheme Coordinator & Laboratory Qualification Program Factory Mutual Research Ph: 781-255-4819 Fx: 781-762-9375 Email: [email protected] -----Original Message----- From: Allen, John [mailto:[email protected]] Sent: Tuesday, January 16, 2001 10:01 AM To: [email protected]; [email protected] Subject: RE: European connectors Hi folks Not an EN60320 device - I think this is the 16A European 2-pin plug with dual (French pin in socket + German spring-loaded side) earthing contacts to Standard Sheet VII of the old CEE 7 standard. This plug is designed to fit almost all Continental European 2-pin sockets, and provides earthing in via the two different routes. Does not fit any British or some Danish, Swiss and Eastern European sockets. Regards John Allen. Thales Defence Ltd Bracknell -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: 16 January 2001 16:37 To: [email protected]; [email protected] Subject: Re:European connectors forwarding for [email protected] ____________________Reply Separator____________________ Subject: European connectors Author: [email protected] Date: 1/12/01 3:22 PM Do anybody know what a Europe VIIG Plug - CEE (7) VII (16amp) is ? Is it similar too an IEC 320 ? ********************************************* Daniel T. Fitzgerald Senior Regulatory Compliance Engineer American Power Conversion 978-670-2440 ext 17307 ********************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
