Ken -
I am afraid, you've been misled: stepping on mother Russia soil for EMC
testing purposes could be avoided.
(Telecom is a different story).
Vitaly Gorodetsky
The suitability of this information for making decision is solely with the
reader
-----Original Message-----
From: Matsuda, Ken [SMTP:[email protected]]
Sent: Wednesday, January 10, 2001 10:43 AM
To: 'Courtland Thomas'; emcpost
Subject: RE: Approvals for Russia
I believe it may require the GOST mark in Russia. There are
definately
EMI/EMC requirements, and subsequent EMI/EMC testing requirements
(on mother
Russia soil at a Russian lab) after a certain period of time.
Regards,
Ken
-----Original Message-----
From: Courtland Thomas [mailto:[email protected]]
Sent: Wednesday, January 10, 2001 11:07 AM
To: emcpost
Subject: Approvals for Russia
Hello Group,
I am interested in knowing if there are any special types of
approvals
required for Russia concerning IT equipment. We typically test our
products
to, and label them with CE, FCC Part 15, UL and where required BABT.
We also
self verify to CTR's 12,13 ad 14 when applicable. Is there anything
else
required.
Thanks,
Courtland Thomas
Patton Electronics
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: [email protected]
Michael Garretson: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
