Vijay,
The basic requirements for components inside of a fire enclosure are in
section 4.7.3.4 and table 4C essentially it requires for V-2 material - there
are exceptions, small components etc, and you can always test, but read that
section and you'll get a pretty clear idea. The tests for determining the
flammability rating are in appendix A
Gary
-----Original Message-----
From: Wani, Vijay (V) [mailto:[email protected]]
Sent: Wednesday, December 19, 2001 5:22 AM
To: '[email protected]'
Subject: UL 60950 - safety related question
hello Group:
i have 8 LCD displays inside a box. if there is an outer metal enclosure,
does internal enclosure (which is plastic at each LCD display) need to be
V-0, does it need an RTI above the operation temperature? where should i
find guideline about V-0 and RTI requirements for particular equipment?
i would appreciate any response.
thank you in advance.
vijay Wani
989-636-0473
Dow Chemical
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: [email protected]
Dave Heald [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
